Insulation & Building Applications
Search for free discovery
0 553 956 5 878
WHITECHEM PU MEMBRAN 450
1 - PRODUCT DESCRIPTION
WHITECHEM PU MEMBRAN 450 is a one component, easily applied, specially formulated polyurethane based coating. After application, it forms a highly elastic, seamless and perfectly crack-bridging waterproofing membrane. Its performance continues even at low temperatures.
2 - FEATURES
Excellent adhesion
Excellent resistance to moisture and weather conditions
Easy to use
Can be applied indoors and outdoors
Ability to set up a crack bridge
Highly elastic
Easy to apply
Economic
Matte appearance
No loss of volume
Resistance to puncture from roots
3 - APPLICATION AREAS
Waterproofing on roofs and concrete structures, areas not open to traffic
Waterproofing of balconies and terraces,
Concrete, brick, asbestos cement, roof tiles, toilet, road and bridge feet etc. over
4 - SURFACE PREPARATION AND APPLICATION
The surface must be clean and dry, free from oil, dirt, grease, coatings and other dirt that may prevent adhesion.
The surface must be strong and of sufficient strength. If unsure, test a test area first.
Weak concrete should be removed and blow holes and voids should be made open.
All dust, loose and loose particles should be removed from the surface with a brush and / or vacuum cleaner before the application of the product.
Before applying, mix the waterproofing membrane for 3 minutes to obtain a homogeneous consistency.
It should not be mixed too much to prevent air entrainment.